During machine working, some faults often occur due to the wear of the components, etc., which is very distressing. In fact, some small tips can be used to reduce the failure rate during process. So, how can we effectively reduce the breakdown of glass machinery?
1、Regular inspection and maintenance
The failure of the equipment should be dealt with in a timely manner, and various maintenance and repairs must be carried out according to the requirements of the equipment. Regular and irregular inspections, timely understanding of the operation of the equipment, timely handling of minor glitch, do not delay the repair time due to small failures, does not affect the use, resulting in greater failures, and even safety accidents.The failure of the equipment should be dealt with timely. Various maintenance and repairs must be carried out according to the requirements of equipment. Regular and irregular inspections, timely learning equipment running status, timely handling of minor glitch, do not delay the repair time due to small failures that does not affect the use, which can lead to great troubles or even safety accidents.
2、Normal working load
Be careful not to work beyond the load that the equipment can bear, and use the equipment within its power. It is necessary to keep machine load evenly increased and decreased, so that the equipment is in a relatively gentle load change, so as to prevent gear box and lifting system from movement in a wide range.
3、Lubrication of various parts of glass machinery
Lubrication is one of the effective measures to reduce mechanical failure. Therefore, it is necessary to select the lubricant reasonably. According to the application conditions, the corresponding lubricating oil or grease should be selected, and the appropriate amount of oil should be mastered. According to the requirements of the equipment, the corresponding quality grade and grade should be selected. In use, neither low-grade lubricating grease nor other types of lubricants can be used instead. Of course, counterfeit greases should not be used.
4、 Divide operator’s duty to reduce failure
Firstly, according to the requirements of spot checking system, a reasonable division of labor is carried out for the post inspection and the professional inspection, and then the corresponding responsibilities are clarified. With responsibility comes pressure, and with pressure comes motivation, then work can be carried out smoothly. Secondly, it is necessary to formulate the necessary incentive mechanism, reward and punish, and make the post inspection possible for long-term development.